Chat Us !

Marketing-1


Marketing-2


Technical-1


Technical-2

Diameter ø 40mm Hollow type/Built-in type Incremental Rotary encoder HE(Hollow type)

Diameter ø 40mm Hollow type/Built-in type Incremental Rotary encoder HE(Hollow type)
Brand: HANYOUNG HANYOUNG
Product Code: HE(Hollow type) Series
Views: 2225
Availability: In Stock
HE(Hollow type) Diameter ø 40mm Hollow type/Built-in type Incremental Rotary :
- Hollow shaft type & Hollow built-in shaft type
- Incremental type
- Wide power voltage
- Simple installation structure
- Various of output specifications
 

Suffix code

Model Code Description
HE - Rotary Encoder(Hollow Shaft/Hollow Built in Shaft)
Appearance 40H / 40HB 8           Ø 8 mm(Standard), Ø 6 mm, Ø 8 mm, Ø 12 mm(Option)
Pulse number per revolution *         *1, 2, 5, 12, 15, 20, 25, 30, 40, 45, 50, 60, 75, 100, 120, 125, 150,
200, 250, 300, 360, 400, 500, 512, 600
Phase type 2       A, B Output
3       A, B, Z Output
3C       A, B, /Z Output
4       A, B, /A, /B Output
6       A, B, Z, /A, /B, /Z Output
Output type N     NPN voltage
O     NPN open collector
T     Totempole
L     Line Driver(Line Driver 5 V d.c)
Power voltage 5   5 V d.c
12   12 V d.c (5 - 12 V d.c)
24   24 V d.c (12 - 24 V d.c)
Wire Specification * Standard type
C Connector
- " * " mark : Only A, B phase can output(Line Drive output is A, /A, B, /B)
- The item that is not in the above revolution is order made product

Specification

Model HE40HB- ---N-
HE40H- ---N-
HE40HB- ---O-
HE40H- ---O-
HE40HB- ---T-
HE40H- ---T-
HE40HB- ---L-
HE40H- ---L-
Output type NPN Voltage output NPN Open collector output Totem Pole Output Line Driver Output
Electrical
Specification
Output type A, B, Z A, B, Z, /A, /B, /Z
Phase difference
on Output
Phase difference between A. B phase : T/4 ± T/8(Cycle of A phase = T)
Max Response
Frequency
300 kHz
Power voltage 5 - 12 V d.c / 12 - 24 V d.c ± 5% 5 V d.c ± 5%
Current
Consumption
70 mA Max. (No-load) Line Drive output below 30 mA (No-load)
Connection
method
WIRE
Control Output
Load voltage : 30 V Max.
Load current : 30 mA Max.
Residual voltage : 0.4 V Max.
For Low
Load current: 30 mA Max.
Residual voltage:
0.4 V Max.
For high
Load current:10 mA Max.
Residual voltage: Above
-2.5 V of rated voltage
For Low
Load current: 20 mA Max.
Residual voltage:
0.4 V Max.
For high
Load current:20 mA Max.
Residual voltage: 2.5 V
Max.
Response time 1μs Max.(Cable length 1.5 m l sink = 30 mA) 1μs Max.
(Cable length 1.5 m
l sink = 10 mA)
1μs Max.
(Cable length 1.5 m
l sink = 30 mA)
Mechanical
Specification
Starting Torque
50 gf · cm(0.005 N · m Max.)
Moment of inertia
40 g · cm² Max.
Permissible Shaft
Loading
Radial : 2 kgf 이내, Thrust: 1 kgf 이내.
Max. Permissible
Revolution
5000 rpm
Bearing Life
1.2 x 108 / rpm: hour
Insulation Resistance
Over 100 MΩ(Base on 500 V d.c mega between terminal and case))
Dielectric strength
800 V a.c (Between terminal and case at 60 Hz for 1 minute)
Vibration Resistance
10 - 55 Hz(Cycle for 1 minute), Double amplitude width : 1.5mm, Each X · Y · Z direction for 2 hours
Shock Resistance
50 G Max
Operating Ambient Temperature
-10 ~ 60 °C(Without condensation), Storage Temperature : -25 ~ 85 °C
Operating Ambient Humidity
35 ~ 85 % RH
Protection
Protection IP 50(IEC Standard)
Wire Specification
5 P, Ø5.0 mm, Length : 1.5 m, Shield cable
(Line Driver Type : 8P, Ø5.0 mm, Length : 1.5 m, Shield cable)
Weight
170 g
Accesory
Spring Bracket

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Copyright © 2007 CV.Autotech Jaya - PT. Autotech Jaya Abadi